Alerts allows for real-time monitoring of incoming sensor data. Custom filters can be designed and run on incoming data to produce alerts as discussed in the following sections.
To create an alert in Info360, follow these steps:
Searches in Info360 can be used in three ways:
Searches are created and designed in the Search tab of the Command Center.
Search Group Selection
A drop-down menu to specify a Search group to constrain the list of Searches.
A drop-down menu to select any saved search for viewing and editing. The list of available searches is defined by the selected search group.
Opens the New/Edit Search window to create a new search or search group. This window controls the name and description of the search or group.
Opens the New/Edit Search window to edit a selected search or search group. This window controls the name and description of the search or group.
Deletes the selected Search or Group.
By clicking the minus or plus sign buttons, the search can be edited to contain more or less filters, which are connected by AND/OR operators. The will open a new branch, while the will close the existing branch.
Opens the Analytical Functions window that gives access to the Info360 Functions library as well as the ability to design a custom functional expression.
To run the currently selected Search on historic data, click the button in the lower corner of the Search tab.
Data Source (*)
This drop-down menu specifies either a specific sensor from which data will be searched, a sensor group, or a Mass Balance Zone.
Data Interval (*)
This drop-down menu specifies the time interval at which data is queried. Using a larger interval enables efficient long-term searches, but any data points between the intervals will be neglected.
Specify the start and end time of historic data to be searched. Clicking in the box opens up a Calendar Selection tool to specify dates in the correct format.
This acts as an optional additional filter option to search only data from a certain sensor type. For example, a search could be applied to a sensor group including multiple sensor types; this field would restrict the sensor type within the group.
The Sensor Type attribute is assigned to each sensor during the Sensor Data Configuration.
Running the Search on data will produce a table of all the data points that satisfy the search criteria. The Search Result table shows all of the entries that satisfy all of the search criteria. Each row of the table shows the Sensor ID from which the data was taken, the Date Time at which the data entry occurred, the Sensor Value at that time, and any other fields that were calculated in the search.
The Track tab displays a table of all saved Tracks and their associated properties. Features allow for Tracks to be created, edited, cloned, deleted, or filtered by group.
The New/Edit Track window defines the properties of a Track, including the search that is used and which sensor/group is tracked.
Track Name (*)
Specifies the name of the Track.
Optional description that appears in table of saved Tracks.
Optional drop-down menu to associate the Track in a saved Track Group.
Drop-down menu to select the Search that will be performed on the data.
Data Source (*)
Drop-down menu to select the data to be tracked; this can include individual sensors as well as sensor groups and Mass Balance Zones.
Data Interval (*)
Drop-down menu to select the time interval at which the Track is applied to the data.
Optional drop-down menu to filter sensors of a certain type from a sensor group. This option is only available when the Data Source is set to a sensor group.
Alert Level (*)
Drop-down menu to select a Workspace to be associated with the Track. Any alert emails triggered by this Track will include a snapshot of the Workspace at the time of the event. This allows staff that receive and email/text to get a glimpse of what is going on in the system without needing to log in to Info360.
Refer to New/Edit Schedule for information on setting up email alerts.
When checked, any alert emails triggered by this track will include a snapshot of the Associated Workspace.
Allows you to invoke URL using the following supported parameters:
The Scheduler page of the Track tab displays a table of all saved Schedules and their properties. Features allow for Schedulers to be created, edited, cloned, deleted, or filtered by group.
The New/Edit Schedule window defines the properties of a Schedule, including the Track that is used and the time schedule at which it is run.
Drop-down menu to select from saved Tracks. The selected Track controls which data is searched and how it is monitored.
Optional selection to assign Schedule to a group for organizational purposes.
Run Type (*)
Run Type selection controls the type of frequency to control how the schedule is run.
Run Time (*)
Controls time of day that the Track will be run. This field is only for Run Types: One Time, Daily, Weekly, and Monthly.
Recur every (*)
Controls the frequency that the Track will be run. The unit varies by Run Type and is posted to the right of the box.
Optional field to enter email addresses to receive any alerts produced by the scheduled Track.
Contacts are organized in Contact Lists which can be saved with sets of emails and SMS email addresses.
You can manage email addresses into Contact Lists.
Select a contact List and Edit () or create a new () list:
Drop-down menu to select a maximum number of emails sent per 30 minute period so that an email inbox is not flooded.
Toggle switch to activate/deactivate the Schedule.
The Alert tab displays a table of all current alerts.
The list of alerts can be filtered by several properties to quickly understand the alerts occurring in the system.
Click to open the filter window with optional filter categories.
Any filter categories can be combined, returning alerts that satisfy all active filters.
Categories include the following:
Link to Map
Click the Sensor ID to switch to the Map tab and zoom to the sensor associated with the alert.
Comments can be added to each alert for review by others.
Each Alert can have a status of Unhandled or Closed. Click an Unhandled status to change it to closed.
Alerts can be deleted individually using the button, or the entire list can be cleared by clicking