Export Pipe Network(s) allows the Connections and Junctions within the current phase to be exported to a LandXML file so that they can be shared with other applications, such as Autodesk® AutoCAD® Civil 3D®. Select the option and specify a location and name for the XML file, this will then present the Export Options as below.
|The Stormwater Control locations will also be exported as Simple Junctions to allow the connectivity to be maintained.|
When exporting a LandXML file there are a couple of parameters that need to be specified.
Land XML Version
This is the version of the LandXML Schema that the export should support. The differences are small and most applications now support version 1.2. However some older applications, or versions of, may only support the older versions so they are available as an option.
|InfoDrainage does not currently support version 2.0 as this is still in draft and has not yet been finalised. Equally it is unsupported by other applications such as Autodesk's Civil 3D 2017.|
Nominal Pipe Size
This is the size of pipe that will be used to represent any conceptual connections that may be present in the InfoDrainage design. i.e. No Delay, Lagged Flow and Custom Connection. This can be set to match the application you are importing into. For example the smallest part in your Civil 3D Parts List.
|This will only be displayed if it is required, where no conceptual connections have been used the option will be hidden.|
InfoDrainage contains some information that is not supported by the LandXML file format. As such they are either approximated as best as we can within the LandXML file exported. These are:
Notes for Civil 3D users
The LandXML file does not provide any mechanism for specifying the Parts available to Civil 3D when importing. As such it is important to have specified the Parts List within the Civil 3D model to include all of the required sections before importing the LandXML file. Go to the Autodesk website for guides on completing these steps.