You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 12 Next »

Introduction

The Civil 3D® Interface, known as InfoDrainage for Civil3D®, allows the engineer to create full drainage networks within the Civil 3D® environment 2019, 2020 and 2021.  The data can then be exchanged with InfoDrainage for full drainage analysis via the IDDX format.

Note

 As it is an optional component it is provided as a separate installer that can be installed as required - Installing InfoDrainage for Civil 3D®

Using the commands

 (TODO replace this image)


These functions can also be executed by typing the following commands at the command prompt

FunctionCommand
Export To InfoDrainageINID_ExportToInfoDrainage
Import From InfoDrainageINID_ImportFromInfoDrainage
Part Mapping ManagerINID_PartMappingManager
AboutINID_About