Introduction
The Civil3D® Interface, known as InfoDrainage for Civil3D®, allows the engineer to create full drainage networks within the Civil3D® environment (v2019 and v2020). The data can then be exchanged with InfoDrainage for full drainage analysis via the IDDX format.
InfoDrainage
Civil3D
To load InfoDrainage for Civil3D® in Civil3D use the Civil3D command 'Netload' and select IDCAD.DLL. Once loaded the InfoDrainage for Civil3D® ribbon will be operational.
(TODO replace this image)
These functions can also be executed by typing the following commands at the command prompt
| Function | Command |
|---|---|
| Export To InfoDrainage | INID_ExportToInfoDrainage |
| Import From InfoDrainage | INID_ImportFromInfoDrainage |
| Part Mapping Manager | INID_PartMappingManager |
| About | INID_About |