You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 10 Next »

Introduction

The Civil3D® Interface, known as InfoDrainage for Civil3D®, allows the engineer to create full drainage networks within the Civil3D® environment (v2019 and v2020).  The data can then be exchanged with InfoDrainage for full drainage analysis via the IDDX format.

InfoDrainage


Civil3D

To load InfoDrainage for Civil3D® in Civil3D use the Civil3D command 'Netload' and select IDCAD.DLL. Once loaded the InfoDrainage for Civil3D® ribbon will be operational.

 (TODO replace this image)


These functions can also be executed by typing the following commands at the command prompt

FunctionCommand
Export To InfoDrainageINID_ExportToInfoDrainage
Import From InfoDrainageINID_ImportFromInfoDrainage
Part Mapping ManagerINID_PartMappingManager
AboutINID_About
Revision HistoryINID_RevisionHistory