You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 9 Next »

Introduction

The Civil3D® Interface, known as IDCAD, allows the engineer to create full drainage networks within the Civil3D® environment (v2019 and v2020).  The data can then be exchanged with InfoDrainage for full drainage analysis via the IDDX format.

InfoDrainage


Civil3D

To load IDCAD in Civil3D use the Civil3D command 'Netload' and select IDCAD.DLL. Once loaded the IDCAD ribbon will be operational.

 (TODO replace this image)


These functions can also be executed by typing the following commands at the command prompt

FunctionCommand
Export To InfoDrainageINID_ExportToInfoDrainage
Import From InfoDrainageINID_ImportFromInfoDrainage
Part Mapping ManagerINID_PartMappingManager
AboutINID_About
Revision HistoryINID_RevisionHistory