You are viewing an old version of this page. View the current version.
Area inflows can be applied to the system using the Area Inflow type.
An area can be entered directly or calculated automatically from the polygon drawn on the Plan.
The Area, Volumetric Runoff Coefficient and Time of Concentration values shown in the preliminary Sizing tab will be used for initial sizing of pipes and stormwater controls using Rational Method style calculations.
If these values are not entered here, the default values or the values from the current dynamic sizing runoff method will be used.
Used to factor the runoff when the Time Area Diagram or Time of Concentration Runoff Methods are selected. Values should be specified seasonally, for Summer and Winter. The CVs specified will be used for the relevant storm's analysis, if that type of storm is selected in the Select Rainfall section within the Analysis Criteria.
The preferred runoff methods can be selected - select from the methods below for details and required input parameters.
Workflow - What's next...?