Previous:
Inlets
| Next:
Percentage Flow
Allows threshold flow rates for the upper and lower limits of the bypass, anything outside of these limits is seen as bypassing this inlet. This leaves anything between these values entering the Stormwater Control or Junction.
Example:
Low Bypass Rate = 2 l/s
High Bypass Rate = 10 l/s
With an approach flow of 15 l/s the captured flow will be 8 l/s, with the 2l/s below and 5 l/s above bypassing the system
Workflow - What's next...?
Connect Inflows to your Stormwater Control, specify Low/High Flow or Outlets or connect to another Stormwater Control or Junction.
Previous:
Inlets
| Next:
Percentage Flow
See the Troubleshooter and Knowledgebase sections of the Innovyze Technical Support portal for a host of information on software downloads, installation guides, and product troubleshooting.