Junction nodes are points placed at the intersection of two or more pipes (intersections or tees). Junctions are used to represent points of water consumption or inflow, points where specific analysis values (e.g., pressure, concentration) are desired, and at points where pipe attributes (e.g., diameter, material) change. Junction nodes must have their elevation above datum (e.g., sea level) specified in order for pressure computations to be meaningful.
How do I...
To create a junction node, do the following:
Click on the Add/Insert Junction icon on your InfoWater Edit Network toolbar.
Once the command is initiated, select the location of the new node by left mouse clicking anywhere on the map display. Suggest a new ID and/or a description on the Junction Identification dialog box and click on the OK button to accept the ID and create the junction. The junction should visually appear at the specified location.
Graphic Selection - To select a junction node for data edit do one of the following:
Choose the Select icon from the Model Explorer - Attribute Tab window and click on the specific Junction.
If a Junction has been prior selected and is a part of the Browse history, it can be re-selected by choosing it from the Browse-History section of the Model Explorer - Attribute Tab window.
Data Edit - To edit the data related to a junction, first select the junction using the tools above. Once selected, edit Junction related data by adding/modifying the Model Explorer - Attribute Tab window. Additionally modifications may be done by editing the DB Tables that may be accessed from the InfoWater Control Center -> InfoWater button -> Edit Pull-down menu -> DB Editor command.
Graphic Edit - To edit the node graphically do one of the following:
From the InfoWater Control Center -> InfoWater button -> Edit pull-down menu choose the Move Node command. Left click once on the junction to select it and choose the new position and left click again to move the junction.
Choose the Move Node icon from the InfoWater Edit Network toolbar. Left click once on the junction to select it and choose the new position and left click again to move the junction