Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Levels that break cover will be highlighted. This only occurs if the Min cover depth option is checked in the Network Design Criteria and the minimum cover depth used is valid. The minimum cover depth used is the value in the network design criteria by default, this can be changed on a per connection basis within the connection form.

Bypass Connections

TThese These work like a standard hydraulic connection, but allow the flow not entering an inlet to be routed to an inlet on another Junction/SWC. Note: A bypass connection will not permit reverse flow as it is connected to an inlet.

...