The Output Report Manger is where you can generate reports and graphs for any element(s) as modeled in InfoWater Pro.
After a successful model run, you can view available results through the Report Manager dialog box available in the InfoWater Pro Ribbon or by clicking on the Graph or Report buttons in the model explorer Model Explorer for an individual element.
Note: Output reports and graphs are static data displays and are not automatically updated with each simulation run. Use the refresh Refresh button to load the current output data into a previously defined report or graph.
From the icons at the top of the Run Manager, the user has you have full control over the associations between an output source in InfoWater Pro and its external output file.
For Example; If a user has example, if you have created and modeled four custom scenarios, the output for each scenario will be made available for report and graphing purposes under the Output Report Manager (under the All Output Sources dialog box). If the user you then wanted to add (load) another model run performed by someone else (perhaps multiple people working on the same project file), then by clicking on the Load Output Source icon, the user you can assign an external output file to a user-defined (internal) output source. Once this is done, the newly imported output source can now be compared with other previously run " output source " models (via graphs and reports).
Tabular reports may be viewed in the Output Report manager as shown below.
Tabular report types are available from the Output Report/Graph dialog box. View Tabular Report page for more information.
Graph reports may be viewed in the Output Report manager as shown below.
Graph report types are available from the Output Report/Graph dialog box. View the Graph Report page for more information.
Show Domain - Shows the report or graph for the active domain. Domain is added to report tab's title.
Show Selection Set - Shows the report or graph of the selected Selection Set. Selection set is added to the report tab's title. Use the Browse button to open the Selection Set Manager.
Show Provided Element ID(s) - Shows the report or graph for the element IDs provided. Use the button to select element IDs from the map view. Use the button to select the beginning and end points of a chain of IDs.
Docked to Report Manager - If selected, reports or graphs will be docked to the report manager. If unselected, reports or graphs will be will be free floating and can be moved and resized independently of the Report Manager. See Floating Graphs and Reports.