Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Under the Junction Concentration tab you have the ability to define the target field measurements for selected junctions that are to be matched in the calibration analysis. The following dialog box items appear for the Junction Concentration tab and are defined as follows:

Menu 

See: WQ_Calibrator_MenuMode

  • Water Quality - This menu item activates the Water Quality dialog box to specify the desired pipe wall coefficient groups, junction concentration field measurements, system constraints and optimization options to run a water quality model calibration.

  • Exit - Exit the WQ Calibrator dialog box.

Run

  • Start - Launch the calibration run based on the input parameters specified and the Run tab will appear on the screen.

  • Stop - Interrupt the calibration run. You can stop the optimization at any time and review your calibration results.

  • Options - Launch the Calibration Options dialog box which controls optimization properties and simulation options. With this command you can specify the convergence parameters, advanced GA options, and the objective function type.

Help

  • Contents - Launch the Contents tab of the WQ Calibrator online help.

  • Index - Launch the Index tab of the WQ Calibrator online help.

  • About WQ Calibrator - Launch the About WQ Calibrator dialog box which summarizes the version properties and other information.

Junction Concentration Data

...