The Display Settings tab controls visual effects and features within InfoWater Pro.
To change Display Settings, go to the InfoWater Pro tab > Project group, click Preferences, and then select the Display Settings tab in the dialog box.
Node Locate Map Extent - The value must be greater than zero and is used with the current map (full) extent to calculate the size of the graphical extents of a zoom. For example, the current map full extent: 10.0 × 16.0; node locate map extent %: 50.0 -> zoom in box size: 5.0 × 8.0. A node in InfoWater Pro refers to a junction, tank, reservoir, pump, or valve. Use the button next to the input box to set the zoom factor directly from the map display.
Pipe Locate Zoom Factor - The value must be greater than zero and is used with the extent box of the pipe to be located to calculate the size of the zoom in box. For example, pipe locate zoom factor: 2.0; extent size of the pipe to be located: 4.0 × 2.0 -> zoom in box size: 8.0 × 4.0.
Decimal placement - Controls the level of decimal accuracy when model inputs and results are presented in the InfoWater Pro project.
Domain Highlighting Color - Choose the domain highlight color here. When you create a domain, the elements included in the domain will be highlighted with this color. The default is red.
Selection Highlighting Color - Choose the selection highlight color here. When you select elements in the map display, the elements included in the selection will be highlighted with this color. The default is yellow.
Inactive Element Color - Choose the inactive element highlight color here. When you inactivate your elements using your Facility Manager, the inactive elements are colored using this color.
Update Contour with Active Timestep - Select a single predefined contour to update with each active timestep.
Default Google Maps Link - From the drop-down list, select the preferred layer to open in Google Maps.
Show Pipe, Pump & Valve Initial Status - Check on to mark all initially-closed pipes, pumps, and valves with a red X.
Show Inactive Elements at Default Display - Check this to display inactive elements at the color specified above. When OFF, the inactive elements will not be displayed at all.
Apply Color Coding to Inactive Element - Enable to have map display color coding applied to inactive elements. Leave unchecked and the inactive elements will not be color coded.
Show Check Valve Direction - Enable to display an arrow on the pipes with the check valve property.
Show Flow Direction - Enable whether or not flow arrows will allowed to be placed. When OFF, you will not be able to place flow arrows in the project, regardless if the Show Flow Direction check box.
Auto Scale Arrow Size - Enable the arrow size to scale as zooming in or out of the map. The size of the arrow gets adjusted based on the zooming scale.
Arrow Size - Specify the arrow size for map display.
Apply Flow Direction to Domain Only - When OFF, flow arrows are drawn for all pipes. When ON, arrows are only displayed for pipes in the domain.
Show Domain with Color Coding - Select to allow color coding of elements in the active domain.
OK - Click OK to save and exit from the Preferences dialog box.
Cancel - Use this to exit without saving from the Preferences dialog box.