Inflow - Item Results shows a summary of how the selected Inflows performed for the current storm/event as highlighted on the Storm Selector.

Graphs

Provides 2 graphs showing different aspects of the result, each of which can be turned on and off as required. For more information, see the Graph Tools and Results Graphs pages.

 Flows - Provides a graph showing the total inflow and rainfall against time.

Note: The Runoff (Flow for Input Hydrograph) will be shown when the Rainwater Tank is active so the effect of this on the Inflow Hydrograph can be seen,

 Pollution - Shows the Pollutant concentration from the inflow against time.

Results

Shows the Inflow rate against Time from the analysis of the Inflow

Note: The Runoff (Flow for Input Hydrograph) will be shown when the Rainwater Tank is active so the effect of this on the Inflow Hydrograph can be seen,

The information is shown to a default number of decimal places, based on the unit. If you want to see more or less decimal places, you can select Increment Decimal or Decrement Decimal from the right click menu. This setting will not be saved between sessions.

Output Interval

The output interval comes from the value selected in the  Analysis Criteria. The results are averaged over the output interval period, for example if the Output Interval is 5 minutes and the Analysis Interval is 1 minute, the results calculated for the 1 - 5 minutes intervals are averaged to produce the 5 minutes result.

Pollution

Provides a break down of the Pollutant loads entering from the Inflows.


Max Inflow and Total Inflow Volume

Under all 3 tabs the values of the Max Inflow and Total Inflow Volume for the Inflow are displayed