Outputs a pre-calculated pattern of values based on a selected ID.

Refer to the Patterns page to generate Patterns based on a set of data.

Parameter

Description

Pattern ID

The ID of the pre-calculated Pattern to be used.

Pattern ID's are shown in the "#" column of the Pattern table.


Example Usage as an Expression:

Pattern(1) - outputs the calculated values of Pattern #1.

Example Reference Chart:

The below example shows a comparison of the current day's tank level readings compared to the 24 hour average pattern of tank behavior for that month.


Tip:

In Reference Charts, Patterns should be reviewed at the time step in which they were created. For example, if an Hourly pattern is viewed at a daily interval, the result will show a flat line.


For information on setting up custom equations and syntax, please refer to Analytical Functions.