Takes in a list of time series, and then calculates the minimum value among list values in each time step.



Input Data*

Defines the time series data fed into the function. This can be a sensor ID or another function.

Convert Unit To

Allows you to convert the units by selecting from the drop-down list.

TimeSeries1Defines the time series data for the first time series that will be used in the function.
TimeSeries2Defines the time series data for the second time series that will be used in the function.

*Input data is optional in most cases. If Info360 detects that the first input is time series data, it will be applied to the function. Otherwise, the current active sensor's data will be used, which is often the case in Reference Charts.

Example Usage as an Expression:

MinList({@Input A}, {@Input B}) - Takes the minimum value among list values from Input A and Input B based on the chart data for the two inputs.


  • The @ symbol is used to access the defined name of an input. When accessing a specific sensor ID, there is no need to use the @ symbol.
  • You can specify whether to use OpenHighLowClose, or Average in your expression. When this is not defined, the calculation uses the values from the data chart. 
  • For more information about writing expressions, refer to Advanced Use of Analytical Functions.

Example Reference Chart:

In the following example, a MinList expression in Biz Block is used to get the minimum value from "Input A" time series (represented by the orange line) and "Input B" time series (represented by the green line) for each time step. The resulting graph, represented by the blue line, shows the minimum flow value from Input A and Input B. 

For information on setting up custom equations and syntax, please refer to Analytical Functions.

To learn more about writing expression for Biz Block, please refer to Biz Block.