Retrieves the maximum value of a sensor for the last five years. The value is calculated daily based on an hourly interval.

Parameter

Description

Input Data*

Defines the time series data fed into the function. This can be a sensor ID or another function.

*Input data is optional in most cases. If Info360 detects that the first input is time series data, it will be applied to the function. Otherwise, the current active sensor's data will be used, which is often the case in Reference Charts.

Example Usage as an Expression:

LifeMax(DMA20 Abnormal Volumes.Lost Volume) - Outputs the maximum data from the DMA20 Abnormal Volumes.Lost Volume input sensor for the last five years.

Examples Reference Chart:

The following example shows the maximum lost volume for the past five years, designated by the orange line, using data input from sensor DMA20 Abnormal Volumes.Lost Volume. The average lost volume for a time period is shown in the same graph for easy comparison. 

This function is most commonly accessed from the Charts on the Chart interface. 

For information on setting up custom equations and syntax, please refer to Analytical Functions.