Areas for Inflows and Storm Water Controls require polygons to be imported.
Currently supported file formats are:
This step allows the location of the file to be loaded by pressing the select button.
This step allows layers of the CAD file to be turned off before loading, as well as setting the units of the file, providing a preview image of the file, and additional options when loading surface data.
At the top of the page is a toolbar containing controls for the preview image.
Band Zoom: Clicking this icon lets users zoom into a specified area of the drawing using the Band Zoom tool.
View Extents: Zooms out the viewing window to full size extents.
The preview image will display the layers of the CAD file which are selected in the layers grid. The view can be moved by clicking and dragging with either the left or middle mouse button. The view can be zoomed in and out with the scroll wheel. The size of the preview image can be changed by left clicking and dragging the bottom edge.
Select the units for the DXF/DWG being loaded so that it can be converted for use with the current units within the software.
This section appears only when surface data is being loaded. Surface Data is added to existing ground points and breaklines.
3D lines become two ground points, one at each end of the line.
3D points become one ground point at the 3D point coordinate.
3D circles become a single ground point at the centre of the original circle.
3D Arcs are approximated to a collection of points based on the total angle the arc passes through. Each point has assumes its level (Z) from the centre of the ellipse/circle it is based on.
3D lines are loaded in as a Breakline. This means that when the ground model is triangulated none of the triangles will cross this line.
Points and circles are both loaded in as individual ground points.
3D Arcs are approximated to a collection of breaklines based on the total angle the arc passes through. Each point has assumes its level (Z) from the centre of the ellipse/circle it is based on.
Text to Cover: The program can also convert text entities to surface points if this option is turned on. The surface point will exist at the text insertion point and will have an elevation equal to the value of the text object (the z coordinate of the text is ignored).
The grid is used to select which layers are displayed in the preview image, and therefore brought in to the design after clicking Finish.
Areas / Images / Surface Data: This is the first column of the grid. The header of this column is dependant on what the CAD file is being loaded into. The check boxes in this column determine if a layer will appear in the preview image loading.
Layers: The names of the layers in the CAD file.
If importing a CAD file previously exported from xpdrainage, you may see a layer titled XPS_StormwaterControlChambers. This layer contains all of the internal Chamber Stormwater Control sub-outlines, and should not be used to import Stormwater Controls or Inflows. The full outlines of all Stormwater Controls are contained in the XPS_StormwaterControl layer.
Select / Deselect All
Clicking on the Select All button will select all of the layers in the table and conversely Deselect All will un-check them.
When using the Load CAD Wizard to load areas of either stormwater controls or inflows, a third step will appear in the wizard. This step allows the selection of a template which the imported areas will be based on.