Previous:
Low/High Flow
| Next:
Rated by Flow
Allows a single percentage to the specified that determines how much of the flow entering the inlet will bypass.
If a percentage of 0% is specified this means that all water entering the inlet will pass straight into the Stormwater Control or Junction. Whereas a value of 100% would mean that no water enters the system.
Section Pages
Workflow - What's next...?
Inflows connect to either Junctions or Stormwater controls via Inlets . Specify an Percentage Flow on these objects then choose to connect to another Junction or Stormwater Control.
Previous:
Low/High Flow
| Next:
Rated by Flow