Tables is a spreadsheet view which provides a centralised display of the data available in your design. Tables provides easy comparison and filtering of Inflows, Junctions, Stormwater Controls, Connections and their associated data, such Inlets, Outlets and Pollutant information. Tables allows you to select which columns and items you want to be displayed.
Allows the current configuration of all of the table views to be saved to a file and easily replicated later (in the initial design or a different one).
The table selector allows you to have multiple tables showing different sets of data and easily switch between these. By default Tables opens with four tabs, one for each of the main object types: Inflows, Junctions, Stormwater Controls and Connections. Inlets and Outlets can also be displayed alongside Junctions and Stormwater Controls.
Note that it is not possible to display objects of different types within one table, unless these objects are part of a Flowpath.
The main purpose of the Selector View is to select which items and which columns will be visible in the Grid View. The Selector View can be collapsed by sliding left or clicking on the separator between the Selector View and the Grid View.
The item selector allows you to control the visibility of different items types (Inflows, Junctions, Stormwater Controls, Connections, Inlets and Outlets) and their associated columns in the grid. It also controls the item properties displayed in the property tree.
The Search Bar allows a quick filtering of the items displayed in the property tree. Type one or several characters, these will be searched within all the property names, in any position (beginning, middle or end of any part of a property name).
The item selector allows you to manage the visibility of items and their associated columns in the grid. Properties related to a selected item are grouped together in a hierarchized and collapsible tree view.
These features help you to filter data so that you just access what is important to you.
Display only the items associated with a given phase. This filter cannot be changed in this version of the software.
Note that the Phase shown in Tables is synced with the Phase shown in the general xpdrainage window.
You can either decide to display “All” items available or only items on a given flowpath from the selected phase.
The Storm Filter allows to display the result values associated to a storm after analysing the design. This filter cannot be used in this version of the software.
This tool provides you with a way to filter or highlight data available in the Grid View. To facilitate the visualization of your design, you can add one or several filters to refine the selection of items. The creation and modification of filters is accessed by following this procedure:
Available list: available filters not currently applied to the selected Table.
Applied list: filters applied to the selected Table.
Left/right arrow, plus and minus buttons: allow the creation and removal of filters and also a way to move filters from one list to another.
Note that a filter created in one table will be available as well in other tables.
Name: personalise the name of the filter.
Type: indicates how the filter will be applied to the grid according to the selected modes:
Column: indicates which column the filter is applied to.
Rule: specifies the filter condition such as “different from”, “greater than”…
Value: Enter or select the value to be compared.
The Grid Toolbar provides the following functionality:
|Expands/collapses the items in the Grid View along with their properties.|
|Turns on/off the filters available in the Filter Bar.|
|Field for specifying a value to apply to a selection of cells when pressing one of the operators.|
|"Equal" operator assigns the specified value to every selected cells.|
|"Add" operator adds the specified value to every selected cells.|
|"Multiply" operator multiplies every selected cells by the specified value.|
|Highlights the current row.|
|Highlights the current column.|
|Colour to be used for the highlight.|
This is the component where the objects and their properties are displayed. Tables is a multidimensional view, it reflects data which you can access from the editor form of each items. Data is sorted and hierarchized to simplify browsing through the different parameters of items available in your design. As an example a Junction would be shown as below:
In this case, any inlets details are not be listed in the "Manhole" row but underneath in the "Inlets" sub-row, this helps categorizing values and having a better visualization of the data.
Below is a list of features that the Grid View offers:
In this page