The Connections Summary Results shows a summary of how each Connections in the current phase performed.


 


Filtering the Results

When the All Items radio button is selected, the summary shows the maximum flow rates entering and leaving together with details of the volumes for each of the Connections in the Phase for the current storm/event as highlighted on the Storm Selector on the Status Bar. The Select Filter drop down filters the results to show All Items or a selected Flow Path.

When the All Storms radio button is selected, the summary shows the maximum flow rates in and out of the Connections selected in the Select Item drop down, together with details of the volumes for each of the storms run. This is of most interest when Rainfall with multiple storms is selected on the Analysis Criteria.

Spreadsheet Preferences

Fields can be turned on or off using the Spreadsheet Preferences form that is accessed from the toolbar at the top of the form. The full set of columns available are shown and can be turned on or off using the check boxes. These settings will be remembered between sessions.

Results

Connections Type - The connection type is shown for reference, full descriptions of each connection type can be found on the Connections page.

From - The US item (Junction or Stormwater Control) is shown for reference.

To - The DS item (Junction or Stormwater Control) is shown for reference.

Max Inflow - The maximum inflow reaching the item for the selected or displayed rainfall event.

Max Outflow - The maximum outflow leaving the item for the selected or displayed rainfall event.

Flow/Capacity - Only shown for Pipes or Channels. The ratio of the maximum inflow to the pipe capacity. The Pipe Capacity is calculated using the Manning's n equation and is based on pipe full conditions. If the ratio is less than 1 then the pipe is capable of taking all the flow. If the ratio is above 1, the pipe capacity is being exceeded and surcharging or flooding may occur.